请教下这个触发为什么会掉线

v1w3

[trigger]panduanlv 复制
    事件
        时间 - 每当游戏逝去 0.10 秒
    条件
    动作
        循环动作[循环整数A]从 1 到 6, 运行 (Loop - 动作)
            Loop - 动作
                设置 Aeibupanduan = (循环整数A [R] + 6)
                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                    If - 条件
                        shanbi[循环整数A [R]] 不等于 shanbi[Aeibupanduan]
                    Then - 动作
                        设置 shanbi[循环整数A [R]] = shanbi[Aeibupanduan]
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                shanbi[循环整数A [R]] 大于或等于 101
                            Then - 动作
                                单位 - 设置 yx[循环整数A [R]] 的 aaaaaaaaa闪避率 等级为 101
                            Else - 动作
                                单位 - 设置 yx[循环整数A [R]] 的 aaaaaaaaa闪避率 等级为 shanbi[循环整数A [R]]
                    Else - 动作
                        不做任何动作
[/trigger]
RT....  

v1w3

这个触发初始不打开，就没掉线....  应该是吧，想做个可以叠加的闪避

a595859893

如果shanbi[循环整数A]=0的话
设置的技能等级也就是0了呢
0级的话会不会导致掉线呢~

w062c30

刚刚试了一下
[jass]
function Trig________________uActions takes nothing returns nothing
    set udg_i = 0
    call SetUnitAbilityLevelSwapped( 'AHfs', gg_unit_Hblm_0000, udg_i )
endfunction

//===========================================================================
function InitTrig________________u takes nothing returns nothing
    set gg_trg________________u = CreateTrigger()
    call TriggerAddAction(gg_trg________________u, function Trig________________uActions)
endfunction
[/jass]

确定了不是这问题~

v1w3

恩，我刚才也查出来了，原来是多面板问题！

v1w3

cc 复制 复制
    事件
        时间 - 每当游戏逝去 0.20 秒
    条件
    动作
        循环动作[循环整数A]从 1 到 6, 运行 (Loop - 动作)
            Loop - 动作
                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                    If - 条件
                        (玩家 循环整数A [R]) 等于 (本地玩家)
                    Then - 动作
                        设置 cksx[1] = wubao[循环整数A [R]]
                        设置 cksx[2] = (wujian[循环整数A [R]] - 1)
                        设置 cksx[3] = ((wuzheng[循环整数A [R]] - 1) x 5)
                        设置 cksx[4] = fabao[循环整数A [R]]
                        设置 cksx[5] = (fajian[循环整数A [R]] - 1)
                        设置 cksx[6] = (转换 (fazheng[循环整数A [R]] x 100.00) 为整数)
                        设置 cksx[7] = (shanbi[循环整数A [R]] - 1)
                        设置 cksx[8] = (wushi[循环整数A [R]] - 1)
                        设置 cksx[9] = fuhuolv[循环整数A [R]]
                        设置 cksx[10] = xul[循环整数A [R]]
                        设置 cksx[11] = xykx[循环整数A [R]]
                        设置 cksx[12] = chuxuelv[循环整数A [R]]
                        设置 cksx[13] = chuxuekx[循环整数A [R]]
                        设置 cksx[14] = chuxuedj[循环整数A [R]]
                        设置 cksx[15] = gandianlv[循环整数A [R]]
                        设置 cksx[16] = gandiankx[循环整数A [R]]
                        设置 cksx[17] = gandiandj[循环整数A [R]]
                        设置 cksx[18] = (((shangjian[循环整数A [R]] - 1) x 25) + 1)
                        循环动作[循环整数B]从 1 到 18, 运行 (Loop - 动作)
                            Loop - 动作
                                设置 Z[循环整数B [R]] = (转换 cksx[循环整数B [R]] 为字符串)
                                多面板 - 设置 CED[循环整数B [R]] 的项目文本为 Z[循环整数B [R]]
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[1] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 1 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[1] 大于或等于 15
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 1 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[1] 大于或等于 35
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 1 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[1] 大于或等于 65
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 1 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[1] 大于或等于 90
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 1 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[1] 大于或等于 100
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 1 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[2] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 2 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[2] 大于或等于 15
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 2 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[2] 大于或等于 35
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 2 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[2] 大于或等于 65
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 2 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[2] 大于或等于 90
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 2 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[2] 大于或等于 100
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 2 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[3] 大于或等于 30
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 3 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[3] 大于或等于 90
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 3 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[3] 大于或等于 200
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 3 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[3] 大于或等于 390
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 3 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[3] 大于或等于 600
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 3 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[3] 大于或等于 900
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 3 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[4] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 4 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[4] 大于或等于 15
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 4 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[4] 大于或等于 35
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 4 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[4] 大于或等于 65
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 4 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[4] 大于或等于 90
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 4 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[4] 大于或等于 100
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 4 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[5] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 5 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[5] 大于或等于 15
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 5 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[5] 大于或等于 35
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 5 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[5] 大于或等于 65
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 5 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[5] 大于或等于 90
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 5 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[5] 大于或等于 100
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 5 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[6] 大于或等于 30
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 6 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[6] 大于或等于 90
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 6 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[6] 大于或等于 200
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 6 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[6] 大于或等于 390
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 6 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[6] 大于或等于 600
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 6 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[6] 大于或等于 900
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 6 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[7] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 7 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[7] 大于或等于 15
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 7 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[7] 大于或等于 35
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 7 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[7] 大于或等于 65
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 7 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[7] 大于或等于 90
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 7 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[7] 大于或等于 100
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 7 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[8] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 8 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[8] 大于或等于 15
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 8 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[8] 大于或等于 35
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 8 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[8] 大于或等于 65
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 8 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[8] 大于或等于 90
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 8 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[8] 大于或等于 100
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 8 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[9] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 9 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[9] 大于或等于 10
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 9 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[9] 大于或等于 25
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 9 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[9] 大于或等于 50
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 9 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[9] 大于或等于 75
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 9 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[9] 大于或等于 90
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 9 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[10] 大于或等于 2
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 10 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[10] 大于或等于 3
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 10 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[10] 大于或等于 4
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 10 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[10] 大于或等于 5
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 10 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[10] 大于或等于 6
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 10 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[10] 大于或等于 7
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 10 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[11] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 11 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[11] 大于或等于 10
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 11 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[11] 大于或等于 25
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 11 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[11] 大于或等于 50
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 11 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[11] 大于或等于 75
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 11 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[11] 大于或等于 90
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 11 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[12] 大于或等于 2
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 12 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[12] 大于或等于 3
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 12 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[12] 大于或等于 4
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 12 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[12] 大于或等于 5
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 12 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[12] 大于或等于 6
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 12 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[12] 大于或等于 7
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 12 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[13] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 13 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[13] 大于或等于 10
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 13 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[13] 大于或等于 25
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 13 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[13] 大于或等于 50
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 13 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[13] 大于或等于 75
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 13 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[13] 大于或等于 90
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 13 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[14] 大于或等于 2
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 14 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[14] 大于或等于 3
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 14 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[14] 大于或等于 4
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 14 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[14] 大于或等于 5
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 14 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[14] 大于或等于 6
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 14 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[14] 大于或等于 7
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 14 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[15] 大于或等于 2
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 15 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[15] 大于或等于 3
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 15 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[15] 大于或等于 4
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 15 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[15] 大于或等于 5
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 15 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[15] 大于或等于 6
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 15 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[15] 大于或等于 7
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 15 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[16] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 16 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[16] 大于或等于 10
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 16 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[16] 大于或等于 25
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 16 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[16] 大于或等于 50
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 16 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[16] 大于或等于 75
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 16 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[16] 大于或等于 90
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 16 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[17] 大于或等于 2
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 17 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[17] 大于或等于 3
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 17 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[17] 大于或等于 4
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 17 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[17] 大于或等于 5
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 17 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[17] 大于或等于 6
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 17 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[17] 大于或等于 7
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 17 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[18] 大于或等于 25
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 18 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[18] 大于或等于 75
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 18 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[18] 大于或等于 140
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 18 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[18] 大于或等于 350
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 18 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[18] 大于或等于 600
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 18 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[18] 大于或等于 1000
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 18 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                    Else - 动作
                        不做任何动作

v1w3

cc 复制 复制
    事件
        时间 - 每当游戏逝去 0.20 秒
    条件
    动作
        循环动作[循环整数A]从 1 到 6, 运行 (Loop - 动作)
            Loop - 动作
                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                    If - 条件
                        (玩家 循环整数A [R]) 等于 (本地玩家)
                    Then - 动作
                        设置 cksx[1] = wubao[循环整数A [R]]
                        设置 cksx[2] = (wujian[循环整数A [R]] - 1)
                        设置 cksx[3] = ((wuzheng[循环整数A [R]] - 1) x 5)
                        设置 cksx[4] = fabao[循环整数A [R]]
                        设置 cksx[5] = (fajian[循环整数A [R]] - 1)
                        设置 cksx[6] = (转换 (fazheng[循环整数A [R]] x 100.00) 为整数)
                        设置 cksx[7] = (shanbi[循环整数A [R]] - 1)
                        设置 cksx[8] = (wushi[循环整数A [R]] - 1)
                        设置 cksx[9] = fuhuolv[循环整数A [R]]
                        设置 cksx[10] = xul[循环整数A [R]]
                        设置 cksx[11] = xykx[循环整数A [R]]
                        设置 cksx[12] = chuxuelv[循环整数A [R]]
                        设置 cksx[13] = chuxuekx[循环整数A [R]]
                        设置 cksx[14] = chuxuedj[循环整数A [R]]
                        设置 cksx[15] = gandianlv[循环整数A [R]]
                        设置 cksx[16] = gandiankx[循环整数A [R]]
                        设置 cksx[17] = gandiandj[循环整数A [R]]
                        设置 cksx[18] = (((shangjian[循环整数A [R]] - 1) x 25) + 1)
                        循环动作[循环整数B]从 1 到 18, 运行 (Loop - 动作)
                            Loop - 动作
                                设置 Z[循环整数B [R]] = (转换 cksx[循环整数B [R]] 为字符串)
                                多面板 - 设置 CED[循环整数B [R]] 的项目文本为 Z[循环整数B [R]]
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[1] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 1 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[1] 大于或等于 15
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 1 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[1] 大于或等于 35
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 1 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[1] 大于或等于 65
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 1 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[1] 大于或等于 90
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 1 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[1] 大于或等于 100
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 1 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[2] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 2 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[2] 大于或等于 15
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 2 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[2] 大于或等于 35
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 2 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[2] 大于或等于 65
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 2 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[2] 大于或等于 90
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 2 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[2] 大于或等于 100
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 2 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[3] 大于或等于 30
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 3 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[3] 大于或等于 90
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 3 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[3] 大于或等于 200
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 3 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[3] 大于或等于 390
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 3 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[3] 大于或等于 600
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 3 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[3] 大于或等于 900
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 3 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[4] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 4 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[4] 大于或等于 15
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 4 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[4] 大于或等于 35
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 4 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[4] 大于或等于 65
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 4 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[4] 大于或等于 90
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 4 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[4] 大于或等于 100
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 4 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[5] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 5 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[5] 大于或等于 15
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 5 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[5] 大于或等于 35
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 5 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[5] 大于或等于 65
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 5 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[5] 大于或等于 90
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 5 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[5] 大于或等于 100
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 5 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[6] 大于或等于 30
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 6 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[6] 大于或等于 90
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 6 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[6] 大于或等于 200
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 6 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[6] 大于或等于 390
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 6 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[6] 大于或等于 600
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 6 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[6] 大于或等于 900
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 6 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[7] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 7 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[7] 大于或等于 15
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 7 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[7] 大于或等于 35
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 7 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[7] 大于或等于 65
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 7 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[7] 大于或等于 90
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 7 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[7] 大于或等于 100
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 7 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[8] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 8 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[8] 大于或等于 15
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 8 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[8] 大于或等于 35
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 8 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[8] 大于或等于 65
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 8 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[8] 大于或等于 90
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 8 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[8] 大于或等于 100
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 8 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[9] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 9 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[9] 大于或等于 10
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 9 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[9] 大于或等于 25
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 9 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[9] 大于或等于 50
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 9 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[9] 大于或等于 75
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 9 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[9] 大于或等于 90
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 9 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[10] 大于或等于 2
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 10 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[10] 大于或等于 3
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 10 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[10] 大于或等于 4
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 10 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[10] 大于或等于 5
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 10 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[10] 大于或等于 6
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 10 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[10] 大于或等于 7
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 10 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[11] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 11 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[11] 大于或等于 10
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 11 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[11] 大于或等于 25
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 11 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[11] 大于或等于 50
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 11 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[11] 大于或等于 75
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 11 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[11] 大于或等于 90
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 11 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[12] 大于或等于 2
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 12 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[12] 大于或等于 3
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 12 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[12] 大于或等于 4
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 12 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[12] 大于或等于 5
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 12 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[12] 大于或等于 6
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 12 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[12] 大于或等于 7
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 12 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[13] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 13 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[13] 大于或等于 10
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 13 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[13] 大于或等于 25
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 13 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[13] 大于或等于 50
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 13 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[13] 大于或等于 75
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 13 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[13] 大于或等于 90
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 13 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[14] 大于或等于 2
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 14 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[14] 大于或等于 3
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 14 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[14] 大于或等于 4
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 14 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[14] 大于或等于 5
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 14 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[14] 大于或等于 6
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 14 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[14] 大于或等于 7
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 14 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[15] 大于或等于 2
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 15 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[15] 大于或等于 3
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 15 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[15] 大于或等于 4
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 15 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[15] 大于或等于 5
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 15 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[15] 大于或等于 6
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 15 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[15] 大于或等于 7
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 15 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[16] 大于或等于 5
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 16 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[16] 大于或等于 10
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 16 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[16] 大于或等于 25
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 16 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[16] 大于或等于 50
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 16 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[16] 大于或等于 75
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 16 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[16] 大于或等于 90
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 16 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[17] 大于或等于 2
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 17 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[17] 大于或等于 3
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 17 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[17] 大于或等于 4
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 17 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[17] 大于或等于 5
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 17 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[17] 大于或等于 6
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 17 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[17] 大于或等于 7
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 17 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                            If - 条件
                                cksx[18] 大于或等于 25
                            Then - 动作
                                多面板 - 设置 CE[1] 第 0 列,第 18 行的项目颜色为(10.00%, 10.00%, 100.00%) 透明度为 0.00%
                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                    If - 条件
                                        cksx[18] 大于或等于 75
                                    Then - 动作
                                        多面板 - 设置 CE[1] 第 0 列,第 18 行的项目颜色为(0.00%, 100.00%, 0.00%) 透明度为 0.00%
                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                            If - 条件
                                                cksx[18] 大于或等于 140
                                            Then - 动作
                                                多面板 - 设置 CE[1] 第 0 列,第 18 行的项目颜色为(100.00%, 100.00%, 0.00%) 透明度为 0.00%
                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                    If - 条件
                                                        cksx[18] 大于或等于 350
                                                    Then - 动作
                                                        多面板 - 设置 CE[1] 第 0 列,第 18 行的项目颜色为(100.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                        如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                            If - 条件
                                                                cksx[18] 大于或等于 600
                                                            Then - 动作
                                                                多面板 - 设置 CE[1] 第 0 列,第 18 行的项目颜色为(100.00%, 0.00%, 0.00%) 透明度为 0.00%
                                                                如果(所有的条件成立) 则运行 (Then - 动作) 否则运行 (Else - 动作)
                                                                    If - 条件
                                                                        cksx[18] 大于或等于 1000
                                                                    Then - 动作
                                                                        多面板 - 设置 CE[1] 第 0 列,第 18 行的项目颜色为(55.00%, 0.00%, 100.00%) 透明度为 0.00%
                                                                    Else - 动作
                                                                        不做任何动作
                                                            Else - 动作
                                                                不做任何动作
                                                    Else - 动作
                                                        不做任何动作
                                            Else - 动作
                                                不做任何动作
                                    Else - 动作
                                        不做任何动作
                            Else - 动作
                                不做任何动作
                    Else - 动作
                        不做任何动作

v1w3

   发不出来触发....

愛婼メ媋楓

太长了吧...

v1w3

果然还是发不出来！  口述吧！
  时间：循环每0.1秒
  条件：无
  动作：循环1-6做动作  PS：6个玩家
        判断-玩家（循环A）=本地玩家
        多面板  改变项文字   然后掉线了

v1w3

求教啊...  如何解决？  又能达到时时刻刻更新多面板？

愛婼メ媋楓

不一定要每秒判断哦，话说你的多面板是判断什么的？

v1w3

引用第11楼愛婼メ媋楓于2011-06-05 22:29发表的  :
太长了吧...

话说确实长了点.....

v1w3

就那样的！  判断-玩家（循环A）  也就是1-6    如果等于本地玩家的话
            改变多面板项目为  智力为3啊什么的  
             如果不是就不做动作

愛婼メ媋楓

眼睛都看花了
  (玩家 循环整数A [R]) 等于 (本地玩家)   
看看是不是这条有问题，或者是变量错了

v1w3

就是那个有问题   不知道该怎么弄...

愛婼メ媋楓

尝试别的触发来判断哦~

Boss

长得让人蛋疼。。。 [s:166]

xiaojiao

看了他发的触发..我感觉我就是个渣...

2323255

我貌似记得本地玩家用的不好很容易导致掉线！